We create our future first with intention and then with action. Plan a treatment plan a month before the New Year - and a miracle will surely happen! Here are hardware techniques that will make you beautiful.
Cosmetology: hardware procedures for urgent rejuvenation
If you contact a beautician in early December, you will have time to complete a complete series of anti-aging procedures, called TTR - Triple Tightening Rejuvenation, in translation: triple facelift (this procedure is also called triple rejuvenation). In addition, both the intensive course and the softer version. If you do not need the full course, then from the procedure below you can choose what is right for you. It all depends on whether you have time for rehabilitation and what results you want to achieve. So, what can you do a month before the holidays?
SMAS level skin tightening
Lifting SMAS is the foundation of any TTR program, both intensive and gentle. During toning, the skin is not injured at all. Therefore, rehabilitation is not necessary! Interestingly, early results were already visible during the procedure: as soon as the doctor finished working on half the face, he gave the patient a mirror. The difference is visible to the naked eye!
Anesthesia:not needed. This is probably the most comfortable lifting technique that is really effective.
Uniqueness:An ultrasound SMAS lift works well on a "heavy, fleshy" face. If the face is thin, there are practically no soft tissues, but there is excess skin, then this procedure is not recommended.
When:can be done at any time even before the holidays. Slight redness and swelling go away after a few hours. However, if you want an intensive TTR course, you should do an ultrasonic lift in the period from December 1 to December 10.
Tighten the superficial and middle layers of the skin and smooth the relief
Fractional resurfacing is the second phase of the intensive TTR program. If in stage 1 we worked at the deep SMAS level, now we go higher. This should be done if:
- the skin has lost its tone,
- acquire an unhealthy color, dull, become rough,
- there are enlarged pores and age spots, acne scars, wrinkles.
During fractionation, thousands of micro-sites are created in the skin, where old, diseased or damaged cells are precisely destroyed with the help of high energy.
Rehabilitation:from 3 to 5 days, it is necessary to follow the doctor's recommendations. Remember that skin after resurfacing becomes very sensitive to solar radiation. If you plan to spend New Year's holidays by the sea or in the mountains, then you need to use a 50-minute SPF sunscreen, even if you go outside for 2 minutes. Solarium access is prohibited.
Anesthesia:local.
Uniqueness:the doctor must correctly select the wavelength and dose of radiation, the depth of penetration and choose the type of exposure used. So hyperpigmentation is removed by superficial erbium laser, and CO2 laser is suitable for scar correction, which can penetrate deeper layers of skin.
When:if you want to get a perfect choice just for the holidays, then do a fractional polishing no later than December 15th. Especially if you have to have time to go through one more, final stage of the three-stage facelift.
Smooths the skin without damaging it
Radiofrequency bipolar removal is a variant of the 2nd stage of Triple rejuvenation for those who are afraid of aggressive procedures. RF lift instantly tightens skin, smoothes and makes it more even. Minor wrinkles are immediately smoothed out, deep ones become less noticeable.
Anesthesia:not needed.
Uniqueness:The RF pick-up is monopolar and bipolar. It is the second that gives a real effect.
When:Any time.
Moisturizing and healthy
In order for the skin to have a healthy and radiant appearance, it must be properly moisturized and cared for. To do this, in the hardware cosmetology arsenal there are two almost magical technologies at once.
Electroporation or, as the procedure is also called, electromesotherapy and laser biorevitalization will help to do this without injections, and therefore the consequences (bruising, swelling).
If electroporation is used, then the biologically active substance penetrates deep into the skin with the help of a special applicator and weak electrical impulses. They feel like a little tingling.
If laser biorevitalization is used, then only hyaluronic acid is used, which is injected into the skin thanks to a low-intensity laser. It's so much fun: the laser gently warms the skin. It immediately acquired light and was filled with vitality. One procedure is enough not to be left without compliments at the party. The duration of the effect depends on how "hungry" your skin is.
The effects of these procedures are largely the same, but there are differences: electroporation effectively repairs age spots, and biorevitalization is aimed at filling deficiencies with hyaluronic acid.
Anesthesia:not needed.
Uniqueness:preparations for electromesotherapy are selected based on individual indications. Biorevitalization can be administered with or without dermabrasion. In the second case, the efficiency of the procedure increases. Dermabrasion itself is very mild and does not hurt the skin, only removes dead cells.
When:at any time, even on festive days.
Unlimited rejuvenation
Hardware makeup can be a great alternative (or combined) with injections. On the eve of the holidays, this is especially true, because after injections, it takes time for rehabilitation.
The techniques described above (besides fractional resurfacing) keep the skin intact, so you don't have to worry about swelling or bruising. By completing a complete program of three stages of enhanced skin tightening, you can even delay the need for plastic surgery in time. And if you can't have surgery today, but look younger - right after the procedure, you know, this is a good alternative.
Some of the main advantages of hardware cosmetology:
- By combining these or other methods, you can adjust the severity of the effects and recovery time after the procedure. Thus, you can achieve the desired result exactly on the desired date.
- Even the busiest people have choices. As you know by now, there are techniques that do not require rehabilitation at all. It takes a maximum of 4 hours per month to complete the program!
- You can choose a pleasant procedure.
- Hardware engineering is suitable for people of all ages - from 16 and up. Moisturizing and nourishing skin, just supporting it during the New Year or fighting age-related changes? It is good that in each case you can choose the option that is right for you.
Be irresistible!